{"id":731,"date":"2023-01-30T17:25:56","date_gmt":"2023-01-30T16:25:56","guid":{"rendered":"https:\/\/magazin.hytrade24.com\/?p=731"},"modified":"2023-09-01T14:32:52","modified_gmt":"2023-09-01T12:32:52","slug":"direct-operated-directional-control-valves-in-comparison","status":"publish","type":"post","link":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/direct-operated-directional-control-valves-in-comparison\/","title":{"rendered":"Direct operated directional control valves in comparison"},"content":{"rendered":"

[et_pb_section fb_built=”1″ _builder_version=”4.19.5″ _module_preset=”default” custom_padding=”3px|||||” global_colors_info=”{}”][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Hydraulic valves<\/a> in comparison<\/h2>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″]<\/p>\n

There are many manufacturers and distributors of direct acting hydraulic directional control valves<\/strong>. We have made the effort and compared<\/strong> the valves of<\/strong> some manufacturers on the basis of<\/strong> the data sheets.<\/strong><\/span><\/p>\n

We have chosen a valve type that is very common from our experience. In addition, this variant has a special feature, which we will discuss below.<\/p>\n

Our choice<\/strong> fell on a 4\/3-way valve<\/strong> in nominal size 6 (Cetop3)<\/strong>, with the switching position A-B closed and P-T connected.<\/strong> We have selected 24 volts DC<\/strong> as the valve voltage. All valves are standard valves without additional options.
The following valve manufacturers<\/strong> can be found in our comparison: Bosch Rexroth, Argo Hytos, Poclain (Kladivar), Parker, Hydromot and Atos<\/strong>.<\/p>\n

Circuit diagram of<\/strong> the valves:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Schaltbild-AB-geschlossen-PT-verbunden.png” alt=”Hydraulic circuit diagram 4\/3 directional valve hydraulics closed with AB and PT connected” title_text=”Circuit diagram AB closed-PT connected” align=”center” _builder_version=”4.22.1″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” height=”100px” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Bosch Rexroth directional control valve
4WE6G6x\/EG24N9K4 (item number R900561282)<\/h2>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Bosch-Rexroth-4-3-Wegeventil.jpg” alt=”Bosch Rexroth direct controlled 4\/3 way valve” title_text=”Bosch Rexroth 4\/3 directional control valve” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”50%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Bosch Rexroth is one of the leading manufacturers of hydraulic valves especially of direct operated directional control valves. The range of variants is immense, which makes it somewhat difficult to find one’s way around the catalogs.<\/p>\n

Here are the main technical specifications<\/strong>:<\/p>\n

[\/et_pb_text][dvmd_table_maker tbl_column_header_count=”0″ tbl_row_header_count=”0″ _builder_version=”4.19.5″ _module_preset=”default” tbl_tcell_text_text_color=”#000000″ global_colors_info=”{}”][dvmd_table_maker_item col_content=”Materialnummer
\nArtikelnummer
\nhydraulisches Anschlussbild
\nElektrischer Anschluss
\nmaximaler Betriebsdruck
\nAnschluss %22T%22
\nVersorgungsspannung
\nDurchflussrate max. (bei DC Ventil)
\nBetriebstemperatur max. \u00b0C (\u00d6ltemperatur)
\nBetriebstemperatur min. \u00b0C
\nBet\u00e4tigungsart
\nGewicht
\nViskosit\u00e4tsbereich
\nMax. Verschmutzungsgrad der Druckfl\u00fcssigkeit (ISO4406)” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”R900561282
\n4WE6G6X\/EG24N9K4
\ngenormt nach Cetop03, DIN NG6, ISO 4401 (CETOP RP121H)
\nf\u00fcr W\u00fcrfelstecker nach DIN 43650
\n350 bar
\n210 bar
\n24V dc
\n80l\/min
\n80 \u00b0C (mit NBR Dichtungen)
\n-20 \u00b0C (mit NBR Dichtungen)
\nElektromagnet
\n1,95 kg
\n2,8….500 mm\u00b2\/s
\nKlasse 20\/18\/15″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][\/dvmd_table_maker][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

When selecting the<\/strong> valves, it should be noted<\/strong> here that the maximum operating pressure for<\/strong> the“SO407<\/strong>” version is only 315 bar<\/strong>. In addition, the maximum flow rate<\/strong> for solenoids with AC voltage<\/strong> is 60 l\/min.<\/strong><\/span><\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Flow characteristics<\/a> Bosch Rexroth (pressure drop \u2206p over volume flow<\/a> qv)<\/h3>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Druckverluste-Bosch-Rexroth.png” alt=”Bosch Rexroth valve pressure drop diagram” title_text=”Pressure losses Bosch Rexroth” align=”center” _builder_version=”4.22.1″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Scheme “G”<\/strong> shows a pressure drop<\/strong> from P to A or P to B of 11 bar<\/strong> at a maximum flow rate of 60 l\/min. From A to T<\/strong> or from B to T<\/strong>, the pressure loss is approx. 9 bar<\/strong>. In the middle switching position<\/strong> (pressureless circulation), the pressure loss at 60 l\/min is approx. 13.5 bar<\/strong>. The valve should only be operated with this switching position up to a maximum of 60 l\/min.<\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Performance limits:<\/h4>\n

Bosch Rexroth specifies performance limits for direct operated directional control valves in the data sheet:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/rd23178_2019-01-Bosch-Rexroth-15-Leistungsgrenzen.png” alt=”Diagram performance limits Bosch Rexroth 4\/3 directional control valve” title_text=”Bosch-Rexroth performance limits” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”75%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Furthermore, the Bosch 4\/3 directional control valve has a negative switching overlap (during the transition from a to b, all channels are briefly connected).<\/span><\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Uebergangsstellung-Bosch-Rexroth.png” alt=”Switching overlap Hydraulic circuit diagram Bosch Rexroth” title_text=”Transition position Bosch-Rexroth” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”75%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_5_font=”||||||||” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Price for Bosch Rexroth directional control valve 4WE6G6x\/EG24N9K4<\/h5>\n

The prices for<\/strong> Bosch-Rexroth directional control valves vary<\/strong> widely. In the Bosch-Rexroth store, the price is around 400 euros, the cheapest internet price<\/strong> (at the time of writing) is 248.14 euros<\/strong>.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”22px” global_colors_info=”{}”]<\/p>\n

Parker Directional Control Valve D1VW 008C NJW<\/h2>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Parker-D1VW_91_1_zm.jpg” alt=”Parker 4\/3 Directional Control Valve D1VW 008C NJW” title_text=”Parker-D1VW_91_1_zm” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”50%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

In addition to Bosch Rexroth, Parker is another leading manufacturer of direct-acting hydraulic directional control valves.<\/p>\n

Technical data:<\/strong><\/p>\n

[\/et_pb_text][dvmd_table_maker tbl_column_header_count=”0″ tbl_row_header_count=”0″ _builder_version=”4.19.5″ _module_preset=”default” tbl_tcell_text_text_color=”#000000″ global_colors_info=”{}”][dvmd_table_maker_item col_content=”Artikelnummer
\nhydraulisches Anschlussbild
\nElektrischer Anschluss
\nmaximaler Betriebsdruck
\nAnschluss %22T%22
\nVersorgungsspannung
\nDurchflussrate max. (bei DC Ventil)
\nBetriebstemperatur max. \u00b0C (\u00d6ltemperatur)
\nBetriebstemperatur min. \u00b0C
\nBet\u00e4tigungsart
\nGewicht
\nViskosit\u00e4tsbereich
\nMax. Verschmutzungsgrad der Druckfl\u00fcssigkeit (ISO4406)
\nStromaufnahme %91A%93 (Halteposition und einschalten)
\nLeistungsaufnahme (Halteposition und einschalten)” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”D1VW 008C NJW
\nDIN 24340 A6 \/ ISO 4401 \/ CETOP RP 121-H \/ NFPA D03
\nStecker nach EN 175301-803, Magnetbezeichnung nach ISO 9461
\n350 bar
\n210 bar
\n24V DC
\n80l\/min
\n70 \u00b0C (mit NBR Dichtungen)
\n-25 \u00b0C (mit NBR Dichtungen)
\nElektromagnet
\n2,1 kg
\n2,8….400 mm\u00b2\/s (empfohlen: 30…80 mm\u00b2\/s)
\nKlasse 18\/16\/13
\n1,29 A
\n31 W” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][\/dvmd_table_maker][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”18px” global_colors_info=”{}”]<\/p>\n

Parker curves (pressure loss \u2206p over volume flow qv)<\/h3>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Parker-D1VW-DE-4-Kennlinien.png” alt=”Parker characteristic curves Pressure loss versus volume flow” title_text=”Parker D1VWDE4 Characteristics” align=”center” _builder_version=”4.22.1″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Diagram “008”<\/strong> shows a pressure drop from P to A or P to B of 9 bar<\/strong> at a maximum flow rate of 60 l\/min.<\/strong> From A to T<\/strong> or from B to T<\/strong>, the pressure loss is approx. 10 bar<\/strong>. In the middle switching position<\/strong> (pressureless circulation), the pressure loss<\/strong> at 60 l\/min is approx. 20 bar<\/strong>. The valve with this switching position should only be used up to max. 60 l\/min should be used, otherwise the pressure loss will be too high.<\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Performance limits:<\/h4>\n

Parker specifies performance limits for<\/strong> direct operated directional control valves in the data sheet:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Leistungsgrenzen-parker.png” alt=”Switching capacity limits Parker D1VW 008C NJW” title_text=”Performance limits-parker” align=”center” _builder_version=”4.22.1″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” custom_margin=”||||false|false” custom_padding=”||||false|false” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Like the Bosch Rexroth valve, Parker also has a negative switching overlap<\/strong>:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Parker-Schaltueberdeckung.png” alt=”Hydraulic circuit diagram Parker switching overlap” title_text=”Parker switch cover” align=”center” _builder_version=”4.22.1″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_5_font=”|600|||||||” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Price for Parker directional control valve D1VW 008C NJW<\/h5>\n

Online prices for<\/strong> Parker directional control valves are around 260,- Euro<\/strong>. A list price could not be determined.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”22px” global_colors_info=”{}”]<\/p>\n

Argo Hytos directional control valve RPE3-063C11\/02400E1<\/h2>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Argo-Hytos-RPE3.jpg” alt=”Argo Hytos solenoid valve RPE3″ title_text=”Argo Hytos RPE3″ align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”50%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Just like Bosch Rexroth and Parker, Argo Hytos is also one of the best-known manufacturers of directly controlled hydraulic directional control valves.<\/p>\n

Technical data:<\/strong><\/p>\n

[\/et_pb_text][dvmd_table_maker tbl_column_header_count=”0″ tbl_row_header_count=”0″ _builder_version=”4.19.5″ _module_preset=”default” tbl_tcell_text_text_color=”#000000″ global_colors_info=”{}”][dvmd_table_maker_item col_content=”Artikelnummer
\nhydraulisches Anschlussbild
\nElektrischer Anschluss (Spulentyp, Stecker)
\nmaximaler Betriebsdruck
\nAnschluss %22T%22
\nVersorgungsspannung
\nDurchflussrate max. (bei DC Ventil)
\nBetriebstemperatur max. \u00b0C (\u00d6ltemperatur)
\nBetriebstemperatur min. \u00b0C
\nViskosit\u00e4tsbereich
\nMax. Verschmutzungsgrad der Druckfl\u00fcssigkeit (ISO4406)
\nBet\u00e4tigungsart
\nGewicht
\nSchaltzeit bei v=32mm\u00b2\/s” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”RPE3-063C11\/02400E1
\nNG 6
\nC22B* \/ K*
\n350 bar
\n210 bar
\n24V DC
\n80l\/min
\n80 \u00b0C (mit NBR Dichtungen)
\n-30 \u00b0C (mit NBR Dichtungen)
\n10….500 mm\u00b2\/s
\nKlasse 21\/18\/15
\nElektromagnet
\n2,2 kg
\nON: 30…50 ms, OFF: 10…50ms” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][\/dvmd_table_maker][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”18px” global_colors_info=”{}”]<\/p>\n

Characteristic curves Argo Hytos (pressure drop \u2206p over volume flow qv)<\/h3>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Druckverluste-Argo-Hytos.png” alt=”Characteristic pressure drop Argo Hytos solenoid valve” title_text=”Pressure losses ArgoHytos” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”75%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Diagram “C11”<\/strong> shows a pressure loss from<\/strong> P to A or P to B of approx. 22 bar<\/strong> at a flow rate of 60 l\/min. From A to T the<\/strong> pressure loss is approx. 22 bar<\/strong>, from B to T approx. 32 bar<\/strong>. In the middle switching position<\/strong> ( pressureless<\/strong> circulation), the pressure loss<\/strong> at 60 l\/min is approx. 21 bar<\/strong>. The valve with this switching position should only be used up to max. 60 l\/min can be used.<\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Performance limits:<\/h4>\n

Argo Hytos gives the following performance curves<\/strong> in the data sheet at max. hydraulic power, nominal temperature and 90% of nominal voltage for direct operated directional control valves<\/strong>:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Leistungsgrenzen-argohytos.png” alt=”Diagram power limits Argo Hytos” title_text=”Performance limits ArgoHytos” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”75%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Like Parker and Bosch Rexroth, the non Argo Hytos valve also has a negative switching overlap<\/strong>:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Argo-Hytos-Schaltueberdeckung.png” alt=”Hydraulic circuit diagram negative switching overlap Argo Hytos valve” title_text=”ArgoHytos switching overlap” align=”center” _builder_version=”4.22.1″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_5_font=”|600|||||||” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Price for Argo Hytos directional control valve RPE3-063C11\/02400E1<\/h5>\n

Online prices for<\/strong> Argo directional control valves are around 155,- Euro<\/strong>. A list price could not be determined. <\/p>\n

You want to buy an Argo Hytos valve? You can find the valve RPE3-063C11\/02400E1 directly on our marketplace<\/a>.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”22px” global_colors_info=”{}”]<\/p>\n

Atos directional control valve DHE-0714-X-24DC<\/h2>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/ATOS-4-3-Wegeventil.jpg” alt=”ATOS 4\/3 Directional Control Valve DHE-0714-X-24DC” title_text=”ATOS 4\/3-way valve” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”50%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

ATOS is an Italian manufacturer of direct operated hydraulic directional control valves and also a well-known supplier of hydraulic valves . In the comparison we have chosen the valve type DHE<\/strong>. This one is the most comparable with the other manufacturers.<\/p>\n

Technical data:<\/strong><\/p>\n

[\/et_pb_text][dvmd_table_maker tbl_column_header_count=”0″ tbl_row_header_count=”0″ _builder_version=”4.19.5″ _module_preset=”default” tbl_tcell_text_text_color=”#000000″ global_colors_info=”{}”][dvmd_table_maker_item col_content=”Artikelnummer
\nhydraulisches Anschlussbild
\nElektrischer Anschluss (Spulentyp, Stecker)
\nmaximaler Betriebsdruck
\nAnschluss %22T%22
\nVersorgungsspannung
\nDurchflussrate max. (bei DC Ventil)
\nBetriebstemperatur max. \u00b0C (\u00d6ltemperatur)
\nBetriebstemperatur min. \u00b0C
\nViskosit\u00e4tsbereich
\nMax. Verschmutzungsgrad der Druckfl\u00fcssigkeit (ISO4406)
\nBet\u00e4tigungsart
\nGewicht
\nSchaltzeit bei v=32mm\u00b2\/s” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”DHE-0714-X-24DC
\nNG 6, ISO 4401: 2005
\nCOE-24DC
\n350 bar
\n210 bar
\n24V DC
\n80l\/min
\n80 \u00b0C (mit NBR Dichtungen)
\n-20 \u00b0C (mit NBR Dichtungen)
\n2,8….500 mm\u00b2\/s, empfohlen 15…100 mm\u00b2\/s
\nKlasse 21\/18\/15
\nElektromagnet
\nkeine Angabe
\nON: 30…50 ms, OFF: 15…25ms” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][\/dvmd_table_maker][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”18px” global_colors_info=”{}”]<\/p>\n

Characteristic curves ATOS (pressure loss \u2206p over volume flow qv)<\/h3>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Druckverluste-ATOS.png” alt=”Characteristic pressure drop ATOS directional control valve” title_text=”Pressure losses ATOS” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”75%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Diagram “4”<\/strong> shows a pressure loss from<\/strong> P to A<\/strong> or P to B of<\/strong> approx. 18 bar<\/strong> at a flow rate of 60 l\/min. From A to T the<\/strong> pressure loss is approx. 24 bar<\/strong>, from B to T<\/strong> approx. 8 bar<\/strong>. In the middle switching position<\/strong> (pressureless circulation), the pressure loss at 60 l\/min is approx. 11 bar<\/strong>. The valve with this switching position should only be used up to max. 60 l\/min can be used.<\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Performance limits:<\/h4>\n

ATOS gives the following performance curves<\/strong> in the data sheet at max. hydraulic power, nominal temperature and 90% of nominal voltage for direct operated directional control valves<\/strong>:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Leistungsgrenzen-atos.png” alt=”ATOS characteristic curve – performance limits” title_text=”Performance limits ATOS” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”75%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

The switching overlap specifications in the catalog show variants<\/strong> for positive as well as negative switching overlap<\/strong>:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/ATOS-Schaltueberdeckung.png” alt=”Hydraulic circuit diagrams Switching overlap ATOS” title_text=”ATOS switching cover” align=”center” _builder_version=”4.22.1″ _module_preset=”default” width=”25%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_5_font=”|600|||||||” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Price for ATOS directional control valve DHE-0714-X-24DC<\/h5>\n

Online prices for<\/strong> ATOS directional control valves are around 145,- Euro<\/strong>. These are valves with a different circuit diagram. A list price could not be determined.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”22px” global_colors_info=”{}”]<\/p>\n

HYDROMOT Directional control valve DSG-3C60-N01-24V<\/h2>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Hydromot_wegeventil_43_ng06_back.jpg” alt=”Hydromot 4\/3 way valve DSG-3C60-N01-24V” title_text=”Hydromot 4\/3 way valve” align=”center” _builder_version=”4.22.1″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

HYDROMOT is an online distributor of direct-acting hydraulic directional control valves based in Luxembourg and has the lowest level of awareness in comparison. Since the directional control valves are offered at very low prices in relation to<\/strong> each other, we have included them in the comparison.<\/p>\n

Technical data:<\/strong><\/p>\n

[\/et_pb_text][dvmd_table_maker tbl_column_header_count=”0″ tbl_row_header_count=”0″ _builder_version=”4.19.5″ _module_preset=”default” tbl_tcell_text_text_color=”#000000″ global_colors_info=”{}”][dvmd_table_maker_item col_content=”Artikelnummer
\nhydraulisches Anschlussbild
\nElektrischer Anschluss (Spulentyp, Stecker)
\nmaximaler Betriebsdruck
\nAnschluss %22T%22
\nVersorgungsspannung
\nDurchflussrate max. (bei DC Ventil)
\nBetriebstemperatur max. \u00b0C (\u00d6ltemperatur)
\nBetriebstemperatur min. \u00b0C
\nViskosit\u00e4tsbereich
\nMax. Verschmutzungsgrad der Druckfl\u00fcssigkeit (ISO4406)
\nBet\u00e4tigungsart
\nGewicht
\nSchaltzeit bei v=32mm\u00b2\/s” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”DSG-3C60-N01-24V
\nNG 6, ISO 4401: 2005
\nD24
\n315 bar
\n100 bar
\n24V DC
\n80l\/min
\n70 \u00b0C (mit NBR Dichtungen)
\n-20 \u00b0C (mit NBR Dichtungen)
\n2,8….100 mm\u00b2\/s
\nkeine Angabe
\nElektromagnet
\n1,9 kg
\nkeine Angabe” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][\/dvmd_table_maker][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”18px” global_colors_info=”{}”]<\/p>\n

Characteristic curves HYDROMOT (pressure drop \u2206p over volume flow qv)<\/h3>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Druckverluste-Hydromot.png” alt=”Hydromot pressure drop diagram 4\/3 way valve” title_text=”Pressure drops Hydromot” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”60%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

The diagram “3C60”<\/strong> shows a pressure loss from<\/strong> P to A or P to B of approx. 12 bar<\/strong> at a flow rate of 60 l\/min. From A to T<\/strong> and from B to T<\/strong>, the pressure drop is approx. 8 bar<\/strong>. In the middle switching position<\/strong> ( pressureless<\/strong> circulation) the pressure loss<\/strong> is not<\/strong> indicated.<\/strong> The valve with this switching position should only be used up to max. 60 l\/min can be used.<\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Performance limits or performance curves<\/h4>\n

HYDROMOT does not<\/strong> specify performance curves<\/strong> in the data sheet.<\/p>\n

Information on the switching overlap<\/strong> is also not to be found<\/strong> in the HYDROMOT catalog, so we assume a positive switching overlap (at the transition from a to b, all connection channels are briefly shut off from each other).<\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_5_font=”|600|||||||” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Price for HYDROMOT directional control valve DSG-3C60-N01-24V<\/h5>\n

The online price for<\/strong> the HYDROMOT directional control valve is a net price of 59.79 euros<\/strong>. In comparison, this valve is the most favorable<\/strong>.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”22px” global_colors_info=”{}”]<\/p>\n

KLADIVAR (Poclain) directional control valve KV-4\/3-5KO-6-2<\/h2>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Poclain-KV-orig.jpg” alt=”Kladivar \/ Poclain 4\/3 way valve directly controlled” title_text=”Poclain \/ Kladivar 4\/3 way valve” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”50%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

KLADIVAR is a Slovenian manufacturer of direct operated hydraulic directional control valves and has been part of the Poclain Group since 2006. <\/p>\n

Technical data:<\/strong><\/p>\n

[\/et_pb_text][dvmd_table_maker tbl_column_header_count=”0″ tbl_row_header_count=”0″ _builder_version=”4.19.5″ _module_preset=”default” tbl_tcell_text_text_color=”#000000″ global_colors_info=”{}”][dvmd_table_maker_item col_content=”Artikelnummer
\nhydraulisches Anschlussbild
\nElektrischer Anschluss (Spulentyp, Stecker)
\nmaximaler Betriebsdruck
\nAnschluss %22T%22
\nVersorgungsspannung
\nDurchflussrate max. (bei DC Ventil)
\nBetriebstemperatur max. \u00b0C (\u00d6ltemperatur)
\nBetriebstemperatur min. \u00b0C
\nViskosit\u00e4tsbereich
\nMax. Verschmutzungsgrad der Druckfl\u00fcssigkeit (NAS 1638)
\nBet\u00e4tigungsart
\nGewicht
\nSchaltzeit bei v=32mm\u00b2\/s” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”KV-4\/3-5KO-6-2
\nNG 6, ISO 4401: 2005
\nkeine weiteren Angaben
\n350 bar
\n210 bar
\n24V DC
\n75l\/min
\n70 \u00b0C (mit NBR Dichtungen)
\n-20 \u00b0C (mit NBR Dichtungen)
\n15….3800 mm\u00b2\/s
\n8
\nElektromagnet
\n2,7 kg
\nON: 50…80 ms, OFF: 30…55ms” _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][\/dvmd_table_maker_item][\/dvmd_table_maker][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”18px” global_colors_info=”{}”]<\/p>\n

Characteristics KLADIVAR (pressure drop \u2206p over volume flow qv)<\/h3>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Kladivar-Cetop03-NG6-3-Kennlinien.png” alt=”Characteristic curves pressure drops Kladivar” title_text=”Kladivar characteristics pressure list CETOP3″ align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”100%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Diagram “6”<\/strong> shows a pressure loss from<\/strong> P to A<\/strong> or P to B of<\/strong> approx. 11 bar<\/strong> at a flow rate of 60 l\/min. From A to T<\/strong> and from B to T<\/strong>, the pressure drop<\/strong> is approx. 13 bar<\/strong>. In the middle switching position<\/strong> ( pressureless<\/strong> circulation), the pressure loss<\/strong> at 60 l\/min is approx. 17 bar<\/strong>. The valve with this switching position should only be used up to a maximum of 60 l\/min.<\/p>\n

[\/et_pb_text][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Performance limits or performance curves:<\/h4>\n

Kladivar gives the following performance curves<\/strong> in the data sheet for max. hydraulic power, nominal temperature 50 \u00b0C<\/strong> and 90 % of nominal voltage<\/strong> for direct operated directional control valves:<\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Leistungsgrenzen-kladivar.png” alt=”Performance curves Kladivar” title_text=”Performance limits Kladivar” align=”center” _builder_version=”4.22.1″ _module_preset=”default” max_width=”75%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

The data in the catalog show positive switching overlap<\/strong>:<\/span><\/p>\n

[\/et_pb_text][et_pb_image src=”https:\/\/hytrade24.com\/hydraulikmagazin\/wp-content\/uploads\/2023\/01\/Kladivar-schaltueberdeckung.png” alt=”Circuit diagram switching overlap Kladivar” title_text=”Kladivar switching overlap” align=”center” _builder_version=”4.22.1″ _module_preset=”default” width=”55%” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][\/et_pb_image][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” header_5_font=”|600|||||||” header_6_font_size=”16px” global_colors_info=”{}”]<\/p>\n

Price for KLADIVAR directional control valve KV-4\/3-5KO-6-2<\/h5>\n

Online prices for<\/strong> KLADIVAR directional control valves are around 131.61 euros<\/strong>. These are valves with a different circuit diagram. A list price could not be determined.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Summary of the most important technical data<\/h2>\n

[\/et_pb_text][dvmd_table_maker _builder_version=”4.19.5″ _module_preset=”default” custom_margin=”||49px|||” global_colors_info=”{}”][dvmd_table_maker_item col_content=”
\nArtikelnummer
\nmax. Durchflussmenge %91l\/min%93
\nmax. Betriebsdruck %91bar%93
\nDruckverlust P-A, P-B (bei 60l\/min)
\nDruckverlust A-T (bei 60 l\/min)
\nDruckverlust B-T (bei 60 l\/min)
\nDruckverlust P-T (bei 60 l\/min)
\nMax. Druck auf Anschluss %22T%22 %91bar%93
\nSchalt\u00fcberdeckung
\nGewicht
\nMax. Verschmutzungs-grad
\nOnlinepreis (*)” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” _builder_version=”4.19.5″ _module_preset=”default” col_tcell_text_font_size=”12px” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”Bosch Rexroth
\n4WE6G6X\/ EG24N9K4
\n80
\n350
\n11 bar
\n9 bar
\n9 bar
\n13,5 bar
\n210
\nnegativ
\n1,95 kg
\n20\/18\/15
\n248,14 Euro” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” _builder_version=”4.19.5″ _module_preset=”default” col_tcell_text_text_color=”#000000″ col_tcell_text_font_size=”12px” col_chead_text_text_color=”#FFFFFF” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”Parker
\nD1VW 008C NJW
\n80
\n350
\n9 bar
\n10 bar
\n10 bar
\n20 bar
\n210
\nnegativ
\n2,1 kg
\n18\/16\/13
\n260,- Euro” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” _builder_version=”4.19.5″ _module_preset=”default” col_tcell_text_text_color=”#000000″ col_tcell_text_font_size=”12px” col_chead_text_text_color=”#FFFFFF” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”Argo Hytos
\nRPE3-063C11\/02400E1
\n80
\n350
\n22 bar
\n22 bar
\n32 bar
\n21 bar
\n210
\nnegativ
\n2,2 kg
\n21\/18\/15
\n155,- Euro” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” _builder_version=”4.19.5″ _module_preset=”default” col_tcell_text_text_color=”#000000″ col_tcell_text_font_size=”12px” col_chead_text_text_color=”#FFFFFF” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”Atos
\nDHE-0714-X-24DC
\n80
\n350
\n18 bar
\n24 bar
\n8 bar
\n11 bar
\n210
\nw\u00e4hlbar
\nkeine Angabe
\n21\/18\/15
\n145,- Euro” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” _builder_version=”4.19.5″ _module_preset=”default” col_tcell_text_text_color=”#000000″ col_tcell_text_font_size=”12px” col_chead_text_text_color=”#FFFFFF” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”Hydromot
\nDSG-3C60-N01-24V
\n80
\n315
\n12 bar
\n8 bar
\n8 bar
\nkeine Angabe
\n100
\nkeine Angabe
\n1,9 kg
\nkeine Angabe
\n59,79 Euro” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” _builder_version=”4.19.5″ _module_preset=”default” col_tcell_text_text_color=”#000000″ col_tcell_text_font_size=”12px” col_chead_text_text_color=”#FFFFFF” global_colors_info=”{}”][\/dvmd_table_maker_item][dvmd_table_maker_item col_content=”Kladivar
\nKV-4\/3-5KO-6-2
\n75
\n350
\n11 bar
\n13 bar
\n13 bar
\n17 bar
\n210
\npositiv
\n2,7 kg
\nNAS 8
\n131,61 Euro” col_tcell_cell_align_horz=”center” col_tcell_cell_align_vert=”center” _builder_version=”4.19.5″ _module_preset=”default” col_tcell_text_text_color=”#000000″ col_tcell_text_font_size=”12px” col_chead_text_text_color=”#FFFFFF” global_colors_info=”{}”][\/dvmd_table_maker_item][\/dvmd_table_maker][et_pb_text _builder_version=”4.19.5″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n

Hydraulic valves in comparison – Conclusion<\/h3>\n

In comparison of the directly controlled hydraulic directional valves <\/strong>the directional control valves from Bosch Rexroth<\/strong> and Parker<\/strong> are, as expected, in the upper price range<\/strong>, with the Hydromot<\/strong> valve being the least expensive<\/strong>. However, the maximum operating pressure and the maximum allowable pressure on the tank line are lowest here. Which valve is suitable for the particular application depends on the required function.<\/p>\n

[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":"

Hydraulic valves in comparisonThere are many manufacturers and distributors of direct acting hydraulic directional control valves. We have made the effort and compared the valves of some manufacturers on the basis of the data sheets. We have chosen a valve type that is very common from our experience. In addition, this variant has a special […]<\/p>\n","protected":false},"author":2,"featured_media":637,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[37,32,31],"tags":[],"class_list":["post-731","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-comparative-tests","category-hydraulic-valves","category-knowledge","et-has-post-format-content","et_post_format-et-post-format-standard"],"_links":{"self":[{"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/posts\/731","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/comments?post=731"}],"version-history":[{"count":20,"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/posts\/731\/revisions"}],"predecessor-version":[{"id":1495,"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/posts\/731\/revisions\/1495"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/media\/637"}],"wp:attachment":[{"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/media?parent=731"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/categories?post=731"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hytrade24.com\/hydraulikmagazin\/en\/wp-json\/wp\/v2\/tags?post=731"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}